Materials Science and Manufacturing Engineering Miscellaneous


Materials Science and Manufacturing Engineering Miscellaneous

Materials Science and Manufacturing Engineering

  1. During the execution of a CNC part program block
    NO20 GO2 X45.0 Y25.0 R5.0
    the type of tool motion will be









  1. View Hint View Answer Discuss in Forum

    NA

    Correct Option: A

    NA


  1. Appropriate instrument to check the flatness of slip gauge is









  1. View Hint View Answer Discuss in Forum

    NA

    Correct Option: C

    NA



  1. In an interchangeable assembly,a shaft of 20+0.015-0.05 mm diameter and a hole of +0.025-0.010 mm diameter form a mating pair. In the worst assembly conditions, clearance between them will be









  1. View Hint View Answer Discuss in Forum

    In worst assembly condition, clearance will maximum
    Clearance (max) = Max hole dia – Minimum shaft diameter
    = 20.025 – 19.995 = 0.030 = 30 microns

    Correct Option: B

    In worst assembly condition, clearance will maximum
    Clearance (max) = Max hole dia – Minimum shaft diameter
    = 20.025 – 19.995 = 0.030 = 30 microns


  1. Diamond wheels should not be used for grinding steel components (T/F)









  1. View Hint View Answer Discuss in Forum

    True yes because carbon and steel having higher affinity to carbon (diamond) can diffuse in to the steel

    Correct Option: A

    True yes because carbon and steel having higher affinity to carbon (diamond) can diffuse in to the steel



  1. Plain milling of mild steel plates produces









  1. View Hint View Answer Discuss in Forum

    NA

    Correct Option: B

    NA