Analog circuits miscellaneous


Analog circuits miscellaneous

  1. In the transistor circuit shown below, the collector to ground voltage is + 20 V.

    The possible condition is









  1. View Hint View Answer Discuss in Forum

    NA

    Correct Option: B

    NA


  1. The gain bandwidth product of a two stage CE amplifier is









  1. View Hint View Answer Discuss in Forum

    NA

    Correct Option: A

    NA



  1. The base-biased transistor circuit of figure is subjected to increase in junction temperature from 25°C to 75°. If β increases from 100 to 150 with rising temperature, percentage change in a-point value (IC, VCE) over the temperature range will be (assume VBE reacts at 0.7 V)










  1. View Hint View Answer Discuss in Forum

    IB =
    VCC - VBE
    =
    12 - 0.7
    = 0.113 mA
    RB100 × 103

    IC = β IB = 100 × 0.113 = 11.3 mA
    VCE = VCC - IC RC
    = 12 – (11.3 × 10–3 × 500) = 5.35 V
    At 75° C IB = 0.113 mA
    IC = β IB = 150 × 0.113 = 16.95 mA
    VCE = 12 – (16.95 × 10–3 × 500) = 3.32 V
    ∴ ∆IC =
    16.75 - 1.3
    × 100 = 50% (increased)
    11.3

    and ∆ VCE =
    3.52 - 6.35
    × 100 = -44.57% (decreased)
    11.3

    Correct Option: B

    IB =
    VCC - VBE
    =
    12 - 0.7
    = 0.113 mA
    RB100 × 103

    IC = β IB = 100 × 0.113 = 11.3 mA
    VCE = VCC - IC RC
    = 12 – (11.3 × 10–3 × 500) = 5.35 V
    At 75° C IB = 0.113 mA
    IC = β IB = 150 × 0.113 = 16.95 mA
    VCE = 12 – (16.95 × 10–3 × 500) = 3.32 V
    ∴ ∆IC =
    16.75 - 1.3
    × 100 = 50% (increased)
    11.3

    and ∆ VCE =
    3.52 - 6.35
    × 100 = -44.57% (decreased)
    11.3


  1. For the given input, output waveform across the diode shown in the figure will be










  1. View Hint View Answer Discuss in Forum

    The diode will not conduct in the negative half of the wave and while it conducts, there will be a small voltage drop across it, shown as 0.06 V on (d)

    Correct Option: D

    The diode will not conduct in the negative half of the wave and while it conducts, there will be a small voltage drop across it, shown as 0.06 V on (d)



  1. For the clamping network shown below, resulting output for the applied input will be










  1. View Hint View Answer Discuss in Forum

    NA

    Correct Option: B

    NA